B1 Wheelchair Frame:

Mini-B1 Wheelchair Frame comes with Width Connector, Extenders, Struts, and 2″ Wheels installed. This frame size is for the smallest dogs and pets

B2 Wheelchair Frame:

Mini-B2 Wheelchair Frame comes with Width Connector, Extenders, Struts, and 4″ Wheels installed. Intermediate size Mini for toy dog breeds and small pets.

B3 Wheelchair Frame:

Mini-B2 Wheelchair Frame comes with Width Connector, (longer) Extenders and Struts, and 4″ Wheels installed. This size frame is for toy dog breeds and small pets weighing up to 10 lbs.

Front Harness

The Front Harness will come attached to the Mini Wheelchair Frame, with removable comfort sleeves attached. Red strap goes under pet’s front legs, black strap goes across chest, blue strap clips over pet’s back. The Front Harness may be removed for washing.

Leg Rings:

The Leg Rings are the rear support system for the pet. Comfortable foam leg rings connected in the center with touch-fastener closures form a flexible “seat” for the pet. Rubber-coated wires wrap around the Wheelchair Frame to connect the Leg Rings easily to the Wheelchair Frame with rubber-coated wires that wrap around the frame.

Stirrups:

Stirrups are used to hold the pet’s legs off the ground if the rear legs are paralyzed. The top end of each stirrup is secured around each back knob of the Wheelchair Frame. The top lock balls are used to hold stirrups in place; the bottom lock balls are secured above the dog’s hocks. 

The Manual:

The manual gives instructions and tips on assembling and using the Walkin’ Wheels Wheelchair.

Extra Fastener Set:

The Extra Fastener Set comes with extra carriage bolts, screws, nuts, and washers in case of unexpected loss of these items from the Wheelchair Frame or Front Harness.

Leg Ring Clamps (optional):

4 Double and 2 Single Clamps are included for use if needed. Clamps can be attached to Wheelchair Frame to prevent Leg Rings from sliding forward.